Sash Window and Patio Door Seals

Renovating Sash Windows.

Sash windows are an intrinsic part of a period house and should be repaired rather then replaced if it is at all possible.

The most important step in the process is measuring existing windows carefully. The exact places to measure, and the tolerances will vary from manufacture to manufacture, so decide on the brand of replacement sash before starting.

Sometimes a window can be improved considerably without replacing the entire unit by just replacing the sash , so you don’t have to replace the existing jambs and casing .This option is particularly helpful if there is no need to change the size or location of the windows.

To find the width, measure from the inside of the jamb on one side of the window to the inside of the other side of the window. Measure at the bottom, middle and top of the window. Use the narrowest measurement for the width of your replacement window.

To find the height, measure from the top of sill to the bottom of window’s head jamb. Measure at the left, middle and right of the window. Use the shortest measurement for the height of your replacement window

NOTE: using the smallest measurements ensures that the replacement window will fit inside the existing window frame.

As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as ASTROFLAME FIRESEALS LTD has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.

The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. ASTROflame (Fireseals) Ltd, disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.

Home

Sash Window and Patio Door Seals Replacement and retrofit sash window seals and patio door seals to weatherproof, draughtproof, conserve energy and reduce intrusive noise.
Sash Window Parting Bead Seals
	A durable seal designed for verticals of timber box sash windows. Smooth moving friction free flippers unaffected by paint or stains Can be fitted in a 10x10mm Carrier facilitating easy removal of the paring bead for sash window maintenance. Available in White or Brown in 3M lengths.
Parting Bead Brush Seal
		White or Brown 3m lengths
Parting Bead Carrier
	Sash Seals - retrofit Solution If groove size is a problem try this Carrier which screws into the original parting bead groove to provide a locator for the parting bead seal. White or Brown, available in 3M lengths only.
Patio Door Seals
Imply
	A flexi-polymer seal ideal for the top, bottom and meeting rail of sliding windows. Available only in Brown and 3M lengths.
Staff Seal
	White or Brown 2.4m lengths
ASTRO CP SEAL Used as an alternative to Imply. Ideal for top, bottom and meeting rails of patio doors etc. PVCu carrier and polypropylene fin pile for added weather protection.
CP1 Offset leg type. Brown/Brown or White/White Carrier/Brush options. Brush pile 6.5mm height and 3M long strip only..
CP2 Centre leg type. Brown/Brown or White/White Carrier/Brush options. Brush pile 6.5mm height and 3M long strip only.
ASTRO CARRIPILE - Self Adhesive For top, bottom and meeting rails of patio doors etc.PVCu carrier and polypropylene fin pile for added weather protection. Self-adhesive backing for speed and ease of fitting. CP3 Self adhesive type. Brown/Brown or White/White Carrier/Brush options. Brush pile 6.5mm height x 3M long strip.
Renovating Sash Windows. Sash windows are an intrinsic part of a period house and should be repaired rather then replaced if it is at all possible. The most important step in the process is measuring existing windows carefully. The exact places to measure, and the tolerances will vary from manufacture to manufacture, so decide on the brand of replacement sash before starting. Sometimes a window can be improved considerably without replacing the entire unit by just replacing the sash , so you don’t have to replace the existing jambs and casing .This option is particularly helpful if there is no need to change the size or location of the windows. To find the width, measure from the inside of the jamb on one side of the window to the inside of the other side of the window. Measure at the bottom, middle and top of the window. Use the narrowest measurement for the width of your replacement window. To find the height, measure from the top of sill to the bottom of window’s head jamb. Measure at the left, middle and right of the window. Use the shortest measurement for the height of your replacement window NOTE: using the smallest measurements ensures that the replacement window will fit inside the existing window frame.

As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as ASTROFLAME FIRESEALS LTD has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein. The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. ASTROflame (Fireseals) Ltd, disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.
Visit the ASTROflame site for Passive Fire Protection Products

Sash Window and Patio Door Seals

Sash Window Parting Bead Seals

Parting Bead Brush Seal

Parting Bead Carrier

Patio Door Seals

Imply

Staff Seal

Renovating Sash Windows.