Raven RP16Si - Smoke and Acoustic Tested Astragal Seal
To Order & Specify
RP16Si is an acoustic, smoke astragal
Used where one door leaf is active
Effective in sealing the meeting stiles
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP16Si - Smoke and Acoustic Tested Astragal Seal | ADRP16Si/2250 | Satin clear (silver) anodised aluminium | 2250mm
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
RP16Si is an acoustic, smoke astragal. Its proven design is effective in sealing the meeting stiles of plain or rebated double doors. Its aluminium trim neatly conceals the sealing portion of the seal and provides a secure weatherproof rebate stop. If necessary, its aluminium fixing leg can be checked out to allow for locks and latches. For maximum acoustic performance, specify two seals, i.e. one for each door leaf. (Minimum door thickness subject to centre latch and dimensions of morticed door bottom seals). RP16Si is used where one door leaf is active. For smoke door magnetic hold open applications such as hospital corridors, sequence select door closers are required.
Location: Meeting stiles of double butt hinged doors.
Min/Max Gap: 2.5mm to 8mm.
Finish: Satin clear (silver) anodised aluminium.
Fixing: Screw fix. Zinc plated, cross recess head CSK S.T. screws supplied. Can be rebated or surface mounted. Fixing holes are pre-drilled
Seal: RP316Si. Grey silicon rubber (SE).
Sizes: Available in 2250 and 2500mm lengths.
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on:
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Astrodraft (part of the Astroflame (Fire Seals) group) has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Astrodraft (part of the Astroflame (Fire Seals) Ltd group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.