Raven RP24Si - Adjustable Door Stop Style Seal
To Order & Specify
An adjustable Raven RP24Si door stop seal for noise, light and smoke
An aesthetic appearance
Quick and easy to install
RP24 has been granted an Australian Design Award
Fire tested in accordance with BS476 Part 22 for half an hour
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP24Si - Adjustable Door Stop Style Seal | ADRP24SiSD | Anodised Satin clear | Singe Door Set - 2 x 2.1m plus 1 x 1m seals
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
An adjustable door stop seal for noise, light and smoke. The Raven RP24Si seal uses independently adjustable fasteners to achieve up to 8mm sealing adjustment for maximum noise control. The seal can be butt jointed at the corners of the frame to product an easily installed continuous seal around the door frame, replacing the conventional doorstop on either steel or timber door frames. It is tamper proof with fully concealed fasteners to give the seal an aesthetic appearance. If fixing to rebated frames of single doors specify a large backset locks.
Location: Head and jambs of single and double butt hinged doors.
Min/Max Gap: 0mm/8mm.
Seal Sizes: Singe Door Set - 2 x 2.1m plus 1 x 1m seals or Double Door Set of 3 x 2.1m lengths seals available.
Finish: Anodised Satin clear.
Used in conjunction: Raven door bottom seals, astragals and thresholds. Please note: If fixing to existing rebated frames of single doors, specify a large backset door latch.
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on:
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Astrodraft (part of the Astroflame (Fire Seals) group) has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Astrodraft (part of the Astroflame (Fire Seals) Ltd group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.