Raven RP38Si - Automatic Threshold Seal
To Order & Specify
Heavy duty, automatic action, door bottom seal.
Tested to 1 million cycles.
Six sizes from 450mm to 1500mm.
Can be cut to exact size required.
Satin Anodized Aluminium.
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP38Si - Automatic Threshold Seal | ADRP38Si/450 | Aluminium anodised | 450mm
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
A medium temperature smoke door bottom seal, with an extruded silicon sealing component. Adjustable for left and right handed operation. Spring loaded to lift clear off the floor as soon as the door leaf is opened by a few millimetres. Self levelling seal operates automatically by pressure against the door jamb on the adjusting screw. Seals when the door closes and retracts automatically when the door is opened. The Raven RP38Si can be face mounted or semi-morticed in proprietary fire doors.
Location Single or double butt hinged door bottoms. Minimum door thickness 50mm for rebated meeting stiles and 40mm for plain meeting stiles (for semi mortice).
Min/Max Gap 3mm to 13mm.
Seal Sizes (mm): 1500, 1220, 1070, 920, 610, 450. Seals can be cut back to exact size.
Standard Finish Aluminium anodised 15 microns. Satin Clear (Silver)
Seal Material Silicon Rubber (SE) (Grey).
Fixing Method Zinc plated, cross recess S.T. screws of the appropriate size and colour are supplied. Escutcheon plates supplied.
Adjustment Has screw for sealing action adjustment.
Replacement Seal RP338Si.
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on: