Raven RP71Si - Seal for Double Doors (both active)
To Order & Specify
The RP71Si seal is achieved by a pair of silicon fins
A medium temperature smoke astragal seal
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP71Si - Seal for Double Doors (both active) | ADRP71Si/2250 | Satin clear (silver) anodised aluminium | 2250mm
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
A medium temperature smoke astragal seal designed for plain or rebated meeting stiles of timber double doors where a centre latch bolt may be required or, where both doors are active. The seal is achieved by a pair of silicon fins. Two RP71Si seals are installed on to the one door stile which allows space for a latch between the two seals. The legs of the seals can be checked out to accommodate the latch bolt front plate providing a continuous seal. Note: Minimum door thickness subject to centre latch and dimensions of morticed door bottom seals.
Location: Meeting stiles of double butt hinged and centre pivot double acting doors.
Min/Max Gap: 3mm to 5mm.
Finish: Satin clear (silver) anodised aluminium (15µm).
Fixing: Screw fix. Colour matched zinc plated, cross recess head CSK S.T. screws supplied. Fixing holes are pre-drilled and countersunk.
Seal: RP371Si. Grey silicon rubber (SE).
Seal Sizes: 2250 or 2500mm stock sizes.
Standard Finish: Anodised Satin Clear.
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on:
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as Astrodraft (part of the Astroflame (Fire Seals) group) has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. Astrodraft (part of the Astroflame (Fire Seals) Ltd group), disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.