Raven RP8Si - Automatic Door Bottom Threshold Seal
To Order & Specify
Heavy duty, automatic action, door bottom seal from Raven RP8Si.
Tested to over 1,000,000 operating cycles without failure.
Six sizes from 380mm to 1220mm.
Can be cut to exact size required.
Aluminium anodised 15 microns. Satin Clear (Silver) finish.
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP8Si - Automatic Door Bottom Threshold Seal | ADRP8Si/380 | Aluminium anodised | 380mm
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
A Hot temperature smoke door bottom seal, with an extruded silicon sealing component. Adjustable for left and right handed operation. Spring loaded to lift clear off the floor as soon as the door leaf is opened by a few millimetres. Self levelling seal operates automatically by pressure against the door jamb on the adjusting screw. Seals when the door closes and retracts automatically when the door is opened. The Raven RP38Si can be face mounted or semi-morticed in proprietary fire doors.
Location Fully morticed into a 15mm x 34mm groove into the bottom of single and double butt hinged timber and metal doors.
Min/Max Gap 3mm to 13mm.
Seal Sizes - 1220mm, 1070mm, 920mm, 820mm, 600mm, 380mm trims to 295mm(min). Seals can be cut back to exact size.
Seal Material Silicon Rubber (SE) (Grey).
Fixing Method Concealed screw fix with colour matched stainless steel escutcheon plates and screws supplied.
Adjustment Has screw for sealing action adjustment.
Replacement Seal RP338Si.
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on: