Raven RP99Si - Automatic Door Bottom Threshold Seal
To Order & Specify
Automatic Drop-Down Door Bottom Seal from Raven RP99Si
Durability tested to over 1,000,000 operating cycles without failure.
Available in many sizes
Fire tested and approved on proprietary fire doors to 120 minutes AS1530.4 and AS/NZS2905.1
For all Enquiries about this product please contact us:
Please quote - Quantity | Trade name | Product Ref | Colour | Size
Typical wording -
10 | Raven RP99Si - Automatic Door Bottom Threshold Seal | ADRP99Si/380 | Aluminium anodised | 380mm
Once your order is received we will phone to confirm all details. For in-stock items orders received before 3pm (Monday-Friday) are dispatched for delivery on the following working day (Monday-Friday).
The Raven RP99Si model is a heavy duty automatic door bottom seal, spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. RP99Si has an extruded silicon component for medium temperature smoke and is an acoustically designed seal for face mounted, semi-morticed or fully morticed applications. The door bottom seal is operated automatically by pressure against the door jamb on its adjustment block (strike). Note: Face mount aluminium angle and all escutcheon plates included.
Location Solid core single and double butt hinged doors. Minimum door thickness 40mm recommended.
Min/Max Gap 1mm to 19mm.
Seal Sizes: 380mm, 600mm, 720mm, 820mm, 920mm, 1070mm and 1220mm. Seals cut back to exact size.
Finish Aluminium anodised 15 microns. Satin Clear (Silver).
Seal Material Silicon Rubber (SE) (Black).
Replacement Seal RP347Si.
Approvals: Conforms to Approved Document E. Approved to BS EN ISO 140.3 | Conforms to Approved Document B. Approved to BS 476 Pt. 20 & 22
For further information on installation requirements please contact the technical:
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on: